04-25-2024, 09:03 PM
Hi Dilshan, no worries, on the home page at the bottom click on "lights" there you can add light modes but they are basic right now.
Before this you need to go to the "configure ports" screen, click on the ports you have the drivers connected to and change the function to "Light". Whatever you want to do with a port you need to tell it here and then it'll show up where it should.
Before this you need to go to the "configure ports" screen, click on the ports you have the drivers connected to and change the function to "Light". Whatever you want to do with a port you need to tell it here and then it'll show up where it should.
