11-13-2016, 02:34 PM
Rob,
Question regarding connection to the expansion hub. Will the hub connect to the display/power board if it fails to get an IP address from the router? Have a situation where my expansion hub isn't connecting to the rest of the controller and am trying to see where it might be hanging up. Everything was working perfectly for the past 5 months.
I've already tried a complete reboot of the controller by unplugging it and still not working. The display and power bar connect and everything there is working. I'm not there to troubleshoot in person so I'm trying to talk someone through what to do. Unable to have them connect to the serial port on the second Due as they can't easily access the port.
I'm going to try to have them login to the router to see what devices are connected, but that won't be until later. Any other thoughts...need to try to figure this out as the expansion controls the ATO and RO unit for the tank. Thanks
Matt
Question regarding connection to the expansion hub. Will the hub connect to the display/power board if it fails to get an IP address from the router? Have a situation where my expansion hub isn't connecting to the rest of the controller and am trying to see where it might be hanging up. Everything was working perfectly for the past 5 months.
I've already tried a complete reboot of the controller by unplugging it and still not working. The display and power bar connect and everything there is working. I'm not there to troubleshoot in person so I'm trying to talk someone through what to do. Unable to have them connect to the serial port on the second Due as they can't easily access the port.
I'm going to try to have them login to the router to see what devices are connected, but that won't be until later. Any other thoughts...need to try to figure this out as the expansion controls the ATO and RO unit for the tank. Thanks
Matt
