12-24-2021, 08:27 PM
Interesting, this could be something with database. I didn't actually test the 6.2 install package but thought I packaged the correct database.
Try logging into it using the following.
Add /phpmyadmin/ to your Pi IP address like below.
http://192.168.1.45/phpmyadmin/
Username = root
Password = robotank
You'll see 4 databases, the first 3 don't mess with, the robotank database is the one.
Expand it, do you see a table called "lightModes", how about "lightModesDetails"?
Click on the "systemSettings" table, you should see one record. Scroll to the right near the end of columns you will see "version" and "versionLatest". Double click each of 6.2 and change to 6.1. Then power cycle controller, go to settings page in UI and click "Check for Update". It should show one, let it run through and see if that sorts it out.
Try logging into it using the following.
Add /phpmyadmin/ to your Pi IP address like below.
http://192.168.1.45/phpmyadmin/
Username = root
Password = robotank
You'll see 4 databases, the first 3 don't mess with, the robotank database is the one.
Expand it, do you see a table called "lightModes", how about "lightModesDetails"?
Click on the "systemSettings" table, you should see one record. Scroll to the right near the end of columns you will see "version" and "versionLatest". Double click each of 6.2 and change to 6.1. Then power cycle controller, go to settings page in UI and click "Check for Update". It should show one, let it run through and see if that sorts it out.