06-06-2016, 04:23 AM
Hi Rob
I use Arduino IDE 1.6.0 to upload sketches. I get the errors when verify the Display sketch:
Arduino: 1.6.0 (Windows 7), Board: "Arduino Due (Programming Port)"
DISPLAY_RoboTank_V2.ino:88:1: error: 'Scheduler' does not name a type
DISPLAY_RoboTank_V2.ino: In function 'void setup()':
DISPLAY_RoboTank_V2.ino:1044:1: error: 'scheduler' was not declared in this scope
DISPLAY_RoboTank_V2.ino: In function 'void loop()':
DISPLAY_RoboTank_V2.ino:1064:1: error: 'scheduler' was not declared in this scope
DISPLAY_RoboTank_V2.ino: In function 'void writeGr()':
DISPLAY_RoboTank_V2.ino:22312:21: error: 'scheduler' was not declared in this scope
DISPLAY_RoboTank_V2.ino:22313:38: error: 'scheduler' was not declared in this scope
DISPLAY_RoboTank_V2.ino:22314:6: error: 'scheduler' was not declared in this scope
Error compiling.
This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.
Both the Power Bar and Expansion sketch compile and upload with no errors.
All libraries folder moved as per your instruction (including "Scheduler") to" ...documents/arduino/liberaries/".
Thanks
I use Arduino IDE 1.6.0 to upload sketches. I get the errors when verify the Display sketch:
Arduino: 1.6.0 (Windows 7), Board: "Arduino Due (Programming Port)"
DISPLAY_RoboTank_V2.ino:88:1: error: 'Scheduler' does not name a type
DISPLAY_RoboTank_V2.ino: In function 'void setup()':
DISPLAY_RoboTank_V2.ino:1044:1: error: 'scheduler' was not declared in this scope
DISPLAY_RoboTank_V2.ino: In function 'void loop()':
DISPLAY_RoboTank_V2.ino:1064:1: error: 'scheduler' was not declared in this scope
DISPLAY_RoboTank_V2.ino: In function 'void writeGr()':
DISPLAY_RoboTank_V2.ino:22312:21: error: 'scheduler' was not declared in this scope
DISPLAY_RoboTank_V2.ino:22313:38: error: 'scheduler' was not declared in this scope
DISPLAY_RoboTank_V2.ino:22314:6: error: 'scheduler' was not declared in this scope
Error compiling.
This report would have more information with
"Show verbose output during compilation"
enabled in File > Preferences.
Both the Power Bar and Expansion sketch compile and upload with no errors.
All libraries folder moved as per your instruction (including "Scheduler") to" ...documents/arduino/liberaries/".
Thanks