06-04-2016, 07:59 AM
Hi, so I finally have the update finished, lots has been changed and optimized to get the sensor and parameter rules working and now you can do almost anything with the equipment. Things that can't be done will be added so they can be done. Big thanks to Chris and Dom for helping test some things out.
I also included logging and graphs for the 12 main water parameters, it just came to my attention some of the graphs are out of range for sea water so that will be updated shortly.
Here's a list of the changes, there's probably more but these are the main ones.
Please post any errors if you find them so I can fix them and if you can think of more features please post them here so they can be considered and not forgotten.
<span style="font-weight: bold; line-height: 12px;">Additions</span><p></p>
<p></p>
<ul>
<li>Parameter and Sensor Rules for Controlling Equipment</li>
<li>Expansion Hub Works With Optical Sensors, Float Switches, any Digital or Analog Sensor and 2 Additional Water Pumps</li>
<li>Data Logging and Graphs for Water Temp, Light Temp, Temp 1, Temp 2, PH, ORP, Dissolved Oxygen, Saturation, Conductivity, TDS, Salinity, Specific Gravity)</li>
<li>Assign Expansion Ports</li>
<li>Test Mode For Lighting Schedules (run through 24hr cycle in 1 minute)</li>
<li>Added ATO Safety Features</li>
<li>Added ATO Status Icon</li>
<li>Added Web Connection Status Icon</li>
<li>24 New Email Alerts</li>
</ul>
<p></p>
<p></p>
<p style="line-height: 1;"><span style="font-weight: bold;">Improvements</span></p>
<p></p>
<ul>
<li>AC Power outlets are now off when controller restarts and resume to proper state</li>
<li>Re-programmed dosing pumps for better efficiency and ability to handle 250 doses per reservoir</li>
<li>Optimized communications between modules</li>
<li>Improved touch screen response</li>
<li>Improved slider response time</li>
<li>Controller can use the accurate DS3231 RTC clock</li>
<li>AC power outlets have indepenant manual mode, when an outlets state is manually changed nothing can change the state of that outlet until the resume button on the home page or webpage is pressed. </li>
<li>Changed web alerts from twitter RSS feed to email </li>
<li>Resume button on home page has 3 functions, if pressed momentariliy AC outlets in manual mode return to auto mode, when pressed and held for 1 second controller beeps and lights resume to current light mode according to the daily schedule. When pressed and held for 5 seconds the controller beeps twice and a hard reset is done on lights and outlets</li>
<li>Optimized display code increasing space for more features</li>
<li>Expansion Hub W5100 Ethernet Shield can now use Fat32 microSD card</li>
</ul>
<p></p>
<p></p>
<p style="line-height: 1;"><span style="font-weight: bold;">Fixes</span></p>
<p></p>
<ul>
<li>Fixed lightning fade on channel 7<br></li>
<li>Fixed fade at start of storm, it went to the cloud target immediately the first time after restarting power bar</li>
<li>Fixed scheduling conflicts, if all schedules where set to midnight some won't go off</li>
<li>Fixed network information displayed in settings</li>
<li>Fixed multiple minor user interface issues</li>
</ul>
I also included logging and graphs for the 12 main water parameters, it just came to my attention some of the graphs are out of range for sea water so that will be updated shortly.
Here's a list of the changes, there's probably more but these are the main ones.
Please post any errors if you find them so I can fix them and if you can think of more features please post them here so they can be considered and not forgotten.
<span style="font-weight: bold; line-height: 12px;">Additions</span><p></p>
<p></p>
<ul>
<li>Parameter and Sensor Rules for Controlling Equipment</li>
<li>Expansion Hub Works With Optical Sensors, Float Switches, any Digital or Analog Sensor and 2 Additional Water Pumps</li>
<li>Data Logging and Graphs for Water Temp, Light Temp, Temp 1, Temp 2, PH, ORP, Dissolved Oxygen, Saturation, Conductivity, TDS, Salinity, Specific Gravity)</li>
<li>Assign Expansion Ports</li>
<li>Test Mode For Lighting Schedules (run through 24hr cycle in 1 minute)</li>
<li>Added ATO Safety Features</li>
<li>Added ATO Status Icon</li>
<li>Added Web Connection Status Icon</li>
<li>24 New Email Alerts</li>
</ul>
<p></p>
<p></p>
<p style="line-height: 1;"><span style="font-weight: bold;">Improvements</span></p>
<p></p>
<ul>
<li>AC Power outlets are now off when controller restarts and resume to proper state</li>
<li>Re-programmed dosing pumps for better efficiency and ability to handle 250 doses per reservoir</li>
<li>Optimized communications between modules</li>
<li>Improved touch screen response</li>
<li>Improved slider response time</li>
<li>Controller can use the accurate DS3231 RTC clock</li>
<li>AC power outlets have indepenant manual mode, when an outlets state is manually changed nothing can change the state of that outlet until the resume button on the home page or webpage is pressed. </li>
<li>Changed web alerts from twitter RSS feed to email </li>
<li>Resume button on home page has 3 functions, if pressed momentariliy AC outlets in manual mode return to auto mode, when pressed and held for 1 second controller beeps and lights resume to current light mode according to the daily schedule. When pressed and held for 5 seconds the controller beeps twice and a hard reset is done on lights and outlets</li>
<li>Optimized display code increasing space for more features</li>
<li>Expansion Hub W5100 Ethernet Shield can now use Fat32 microSD card</li>
</ul>
<p></p>
<p></p>
<p style="line-height: 1;"><span style="font-weight: bold;">Fixes</span></p>
<p></p>
<ul>
<li>Fixed lightning fade on channel 7<br></li>
<li>Fixed fade at start of storm, it went to the cloud target immediately the first time after restarting power bar</li>
<li>Fixed scheduling conflicts, if all schedules where set to midnight some won't go off</li>
<li>Fixed network information displayed in settings</li>
<li>Fixed multiple minor user interface issues</li>
</ul>
