Getting updated reef-pi code from JFReyes

[Rob F]

Hello,

When the system is off the sump level rises with no return pump running. When everything turns back on at once the skimmer can overflow due to the high water level in the sump until the return pump has a chance to bring it back to normal.

Thanks again!
John

I think what Jose is suggesting should work.

• Try adding a sensor and place at the level you want the skimmer to turn on.
  
• Add the sensor to the ATO tab and for "control" select "equipment" and then select the skimmer from the drop down list.
  

Now the skimmer should only run when the water level is low in sump, if the sensor logic is flipped you can go to the "configuration" -> "connectors" and edit the connector for the sensor port you use, tick the "reverse" option. Then go to the "Admin" tab and press the "reload" button. At this point things should be working as expected.

If you need more help maybe start a new thread so we don't fill this one with unrelated talk.