05-14-2016, 08:26 PM
Hi Aron, on the expansion hub the microSD card has to be formatted as fat or fat16, you probably don't have the option because the card is so large. There's a small program called SDformatter that might format it correctly. The new update has been changed so the expansion hub can use fat32, I'm trying hard to get it finished but I caused a problem I have to fix before I release it.
With your lights maybe its because the display has different settings then the power bar, that can happen if you change a setting without the power bar connected. Try pressing the sync button on the page you attached, that should fix it.
The IP not showing is a problem however its only visual. It looks like your local IP is 192.168.8.20 but there could be a number at the end that was cut off. In the browser type in 192.168.8.20:7626 and it should load.
With your lights maybe its because the display has different settings then the power bar, that can happen if you change a setting without the power bar connected. Try pressing the sync button on the page you attached, that should fix it.
The IP not showing is a problem however its only visual. It looks like your local IP is 192.168.8.20 but there could be a number at the end that was cut off. In the browser type in 192.168.8.20:7626 and it should load.