12v Relais board - Printable Version +- Robo-Tank DIY Aquarium Controller Forum (https://www.robo-tank.ca/forum) +-- Forum: Members Zone (https://www.robo-tank.ca/forum/forum-11.html) +--- Forum: DIY - Do It Yourself (https://www.robo-tank.ca/forum/forum-14.html) +--- Thread: 12v Relais board (/thread-393.html) |
12v Relais board - Gordon Lehmann - 02-28-2019 I have two 8-fold relay boards which are operated with 12 volt. Can I connect they normaly to robo tank to operate my 8 fold 240 volt sockets? RE: 12v Relais board - Rob F - 02-28-2019 Yes I think the 12v relay will switch with a 5v signal. Just need to power up with 12v. RE: 12v Relais board - Gordon Lehmann - 02-28-2019 only to which pins on the robo tank are the 8 relays connected? of the LED channels, I already need 14, ie there are only 2 over RE: 12v Relais board - Rob F - 02-28-2019 The controller PCB has some pins on it for the 16 relays, it's separate from the LED channels. RE: 12v Relais board - Gordon Lehmann - 03-01-2019 that sounds perfect! So the relay connection is quite normal as on an arduino directly RE: 12v Relais board - Rob F - 03-01-2019 yeah exactly like an Arduino directly. |