+- Robo-Tank DIY Aquarium Controller Forum (https://www.robo-tank.ca/forum)
+-- Forum: Robo-Tank (https://www.robo-tank.ca/forum/forum-1.html)
+--- Forum: Reef-pi Software Questions (https://www.robo-tank.ca/forum/forum-5.html)
+--- Thread: Temp heater issues (/thread-1467.html)
Temp heater issues - Weilerda - 01-16-2022
Very new to reef pi and have been moving along getting set up. I have v2 deluxe with power bar and have a temp sensor that appears to be working in reef pi. I went to install the heater on plus 7 and 8 and set up under temperature heater and heater threshold at 80 (cycling tank). The problem is I can manually turn on the switch, but the temperature turns it off every time it reads. I had the tank at 74 and it alway did this. What am I missing. I believe I’m on the latest version of reef pi. Any help is appreciated.
RE: Temp heater issues - Rob F - 01-16-2022
Hi Weilerda, I think that's a bug in reef-pi, you'll need to add some control for a chiller. If you setup a fake piece of equipment you can set it to that.
RE: Temp heater issues - Weilerda - 01-17-2022
Thank you that seemed to fix. Appreciate your help.
RE: Temp heater issues - Rob F - 01-17-2022
Good to hear.