+- Robo-Tank DIY Aquarium Controller Forum (https://www.robo-tank.ca/forum)
+-- Forum: Robo-Tank (https://www.robo-tank.ca/forum/forum-1.html)
+--- Forum: DIY Hardware Questions (https://www.robo-tank.ca/forum/forum-3.html)
+--- Thread: Sensor Extension Rev C (/thread-1198.html)
Sensor Extension Rev C - zfreak_1125 - 02-22-2021
Rob,
Any way to configure one of the ports on the REV C sensor extension to accept a simple float switch? Using it for the ATO sensors (1 optical, 1 float backup) and wanted to minimize cable running under the stand.
Thanks,
Matt
RE: Sensor Extension Rev C - Rob F - 02-23-2021
Hi Matt, yeah you can. You need to connect float to +5v pin and data pin.
To find those pins look at the optical sensor you have plugged in, the white wire is +5v and yellow is data. Use those pins on the respected port you choose.