analog signal - Printable Version +- Robo-Tank DIY Aquarium Controller Forum (https://www.robo-tank.ca/forum) +-- Forum: Robo-Tank Arduino Based - NO LONGER AVAILABLE (https://www.robo-tank.ca/forum/forum-16.html) +--- Forum: Robo-Tank Circuit Board Questions (https://www.robo-tank.ca/forum/forum-17.html) +--- Thread: analog signal (/thread-102.html) |
analog signal - jimsreef - 04-10-2016 Will robo-tank kit work with The mars aqua led light if I purchase it? Jim RE: analog signal - Rob F - 04-10-2016 Hi Jim, I did some looking around and it looks like it can be done if you open it and add wires to connect it to the controller. I found this video with someone showing it working if this is the light you have? They appear to operate on 0-10v analog signal which is no problem. If you take the lid off and everything is the same then it should be ok but I can't guarantee it. https://www.youtube.com/watch?v=0SsT28rSmjI Instead of plugging into the Apex you would connect to Robo-Tank. :) RE: analog signal - jimsreef - 04-10-2016 (04-10-2016, 07:54 PM)robsworld78 Wrote: Hi Jim, I did some looking around and it looks like it can be done if you open it and add wires to connect it to the controller. I found this video with someone showing it working if this is the light you have? They appear to operate on 0-10v analog signal which is no problem. If you take the lid off and everything is the same then it should be ok but I can't guarantee it. How does the internet expansion work? Is there an app to download so we can contorl from our phone? RE: analog signal - rott - 04-10-2016 I have 6 of those lights and would be interested in seeing if they ramped but really is it worth it to do it for 2 channels all blue or all white that is what I am going back and forth with RE: analog signal - Rob F - 04-10-2016 There is no app, you connect to a webpage running on the controller. The webpage is phone friendly, here's a link to how it looks, on a phone everything goes in one column and you scroll up or down the page. https://www.robo-tank.ca/forum/Thread-Web-Access It is easy to connect, you can load a custom 9 character password and username on a file that goes on the SD card. Then type in your local IP address or your IP address from your internet provider in any browser and it should work. RE: analog signal - Rob F - 04-10-2016 (04-10-2016, 08:25 PM)rott Wrote: I have 6 of those lights and would be interested in seeing if they ramped but really is it worth it to do it for 2 channels all blue or all white that is what I am going back and forth with Nice, get to it! Do you have one of those digital-analog converters? If not PM me. I think it would be worth it, then they can slowly come on/off. RE: analog signal - Rob F - 04-13-2016 Someone sent me this link, this person confirmed with an oscilloscope that those lights do run on 0-10v analog so they shouldn't be a problem. Just need to run wires to the dimming wires. http://www.reefcentral.com/forums/showthread.php?t=2547287 |