LED's

S

SyberSects

New member
So all my AI Prime 16HD's have melted out there len's. I'm looking to just replace them with some cheap amazon LED's. wondering which would be the easiest to be supported by robo-tank? i had the viperspectra's at one point but these required some heavier modification then i was in the mood for at the time.
 
Sort by date Sort by votes
At this point I've been recommending the Nicrew light as it's affordable and plug and play. The 50w, 100w and 150w version will work. You just need a 3.5mm TRS cable that plugs into the equipment extension, you can connect up to 4 of these lights. From what I've heard I don't think it's a bad light but certainly not the best. It's getting hard finding lights that are compatible with external controllers.

https://www.amazon.com/NICREW-Aquar...dcfeb359ad69a&language=en_US&ref_=as_li_ss_tl
 
Upvote 0 Downvote
@Rob F I am trying to setup my new Robo Tank to work with some new NiCrew Hyper Reef 150's. I can get them to work but each channel when not at full power flickers. I have my dip switches set for 0-10 analog and I have tried all 4 ports. Any Insights?
 
Upvote 0 Downvote
Tea said:
@Rob F I am trying to setup my new Robo Tank to work with some new NiCrew Hyper Reef 150's. I can get them to work but each channel when not at full power flickers. I have my dip switches set for 0-10 analog and I have tried all 4 ports. Any Insights?
Click to expand...
Hi @Tea, I replied over here.

NiCrew Hyper Reef 150's

@Rob F I am trying to setup my new Robo Tank to work with some new NiCrew Hyper Reef 150's. I can get them to work but each channel when not at full power flickers. I have my dip switches set for 0-10 analog and I have tried all 4 ports. I have a v3 controller and am running v 6.6 Any Insights?
robo-tank.ca robo-tank.ca
 
Upvote 0 Downvote
Back
Top