Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
set up dc port 1 to dose v1 controller
#1
I have been trying to get dc port 1 to run a dosing pump on the v1 controller. I change the dc port 1 from outlet to jack using the same pin and did a reload in the admin. Still not running. I tested the pump to make sure it works and it does. Dc ports 4,5,6,7 are being used which they work great dosing. help. Using reef_pi.
Reply to top
#2
Hi zstreetreef, have you added a jumper to the backup float switch port? DC1, DC2 and DC3 have one of these, if no jumper is installed the ports won't work, here's a page explaining them.

https://docs.google.com/document/d/1Vko1...=h.3j2qqm3
Reply to top
#3
Works, Thanks.
Reply to top
#4
Good to hear, that catches a lot of people.
Reply to top


Possibly Related Threads…
Thread Author Replies Views Last Post
  reef-pi with v2 controller gandalf 1 326 04-06-2022, 12:48 PM
Last Post: Rob F
  dc port pin same as ac port pin zstreetreef 1 402 10-29-2021, 11:12 AM
Last Post: Rob F

Forum Jump:

Current time: 08-17-2022, 07:09 AM