This is a full kit which requires assembling, everything is included along with high-quality 3D printed cases using PLA material, they are strong but have some imperfects due to 3D printing. PCB board color may vary.

If you would like a fully assembled kit check out our Plug & Play kits here.

All circuit boards come fully assembled and tested, only need to mount and plug things in. Some basic soldering is required.


This kit includes the following.

Display Parts
  • 7" TFT Touch Screen (tested for defects)
  • Display Circuit Board (assembled and tested)
  • Arduino Compatible DUE R3 (mounted, programmed and tested)
  • Display Case - 3D Printed PLA (color options on right side of page)
  • 2gb or 4gb SD Card
  • Piezo Electronic Tone Buzzer Alarm with keyed Connector (requires soldering)
  • Photocell with keyed Connector (requires soldering)
  • Mounting Hardware and Heatshrink
Controller Parts
  • Controller Circuit Boards (assembled and tested)
  • Controller Case - 3D Printed PLA (color options on right side of page)
  • Arduino Compatible DUE R3 (mounted, programmed and tested)
  • Arduino Compatible w5100 Ethernet Sheild (mounted and tested)
  • 2gb or 4gb microSD Card
  • DC Power Jack and Connector with Wire (requires soldering)
  • External Green Power LED with Bezel and keyed Connector (requires soldering)
  • 50cm Micro USB to USB B Female Panel Mount Cable (for external programming)
  • 27cm RJ45 Female to Male Panel (for internet connection)
  • VGA Female Sockets with Patch Cable using Keyed Connector (requires soldering)
  • 4 Pin Screw Terminal Connectors for controller (20 pieces)
  • Mounting Hardware and Heatshrink
Power Bar
  • Power Bar Case - 3D Printed PLA (color options on right side of page)
  • 12v - 3.2 Amp Power Supply (input up to 250v AC) 
  • 5v - 8ch Relay Module (input up to 250v AC) (includes one, requires 2 to run 16 AC outlets plus other small parts)
  • North American 3 Pin AC Outlet - Type B (8 pieces) (ships default, see options on right side to change outlet style)
  • 16amp 120-250v AC On/Off Switch
  • AC Power Socket with 10amp Fuse (IEC 320 C13/C14 Type, 110v - 240v)
  • VGA Socket and jumpers for connecting power bar to controller (requires soldering)
  • Depont style jumpers (some requires soldering)
  • 3amp DC-DC Adjustable Regulator Board (requires soldering)
  • 4 Position Terminal Block with Cover
  • Insulated 4 Position Metal Fork Strip for Terminal Block
  • Yellow Fully Insulated Nylon Female Spade Crimp Connector Terminals (32 pieces)
  • 16awg Wire to connect AC outlets internally (color of wire may vary)
  • 2.1mm DC Power Plugs (2 pieces)
  • 2.1mm DC Power Sockets (2 pieces)
  • 4-5ft AC Power Cord Type B (if you change outlet style this is not included but required)
  • Mounting Hardware and Heatshrink
Cables and other Parts
  • High-Quality 6ft VGA Cable (for connecting power bar)
  • 15ft High-Quality cat6 Ethernet Cable (for connecting display) (cord is black and round not blue and flat like image above)
  • 6ft 18awg DC Power Wire (requires soldering)
  • DS18B20 Waterproof Digital Temperature Sensor Probe - 5 meter cable
  • DS18B20 Digital Temperature Sensor (no cable included)
  • DHT22/AM2302 Digital Temperature and Humidity Sensor - (no cable included)
  • 12" USB Programming Cable (2 pieces)

** Kit requires standard Ethernet patch cable for internet connection

** If you don't select North American AC Outlets you need to supply an AC power cord which you can buy locally at any computer store

The enclosures in the images will be similar to what you receive, due to 3D printing they all look slightly different but will be close

Write a review

Note: HTML is not translated!
    Bad           Good

Robo-Tank Deluxe DIY Aquarium Controller Kit

  • Product Code: RoboDIYFull
  • Availability: In Stock
  • $389.95 USD


Available Options

Select AC Outlet Style:
Name Quantity Price
($15.00 USD)
Total Box:

Kit Addons:
Name Quantity Price
$32.95 USD
$8.95 USD
$8.49 USD
$13.95 USD
$1.00 USD
Total Box:

Case Colors Available:
Name Quantity Price
Total Box:


Related Products

8 Channel 5v PWM Digital to Analog Signal Converter Kit

8 Channel 5v PWM Digital to Analog Signal Converter Kit

This is a small 5cm x 5cm 8 channel digital to analog converter. Connect a 5v PWM signal to the inpu..

$24.95 USD

DIY Automatic Top Off Kit - ATO

DIY Automatic Top Off Kit - ATO

Never have a flood or let your aquarium level drop with this Automatic Top Off (ATO) system for Robo..

$34.95 USD

Robo-Tank DIY Aquarium Controller Kit - Plug and Play

Robo-Tank DIY Aquarium Controller Kit - Plug and Play

This is a fully assembled Robo-Tank Controller and includes a 7" touch screen, 8 outlet AC Power Bar..

$469.95 USD

Robo-Tank DIY Aquarium Controller Kit Plug & Play (no power bar)

Robo-Tank DIY Aquarium Controller Kit Plug & Play (no power bar)

This kit comes with a fully assembled Robo-Tank Controller and includes the 7" touch screen.The kit ..

$369.95 USD

Robo-Tank AC Power Bar Arduino Compatible - North America

Robo-Tank AC Power Bar Arduino Compatible - North America

This is the official 10amp 120-240v, 8 Outlet AC Power Bar for the Robo-Tank DIY Aquarium Controller..

$104.95 USD

Robo-Tank AC Power Bar Arduino Compatible - Australia

Robo-Tank AC Power Bar Arduino Compatible - Australia

This is the official 10amp 120-240v, 8 Outlet AC Power Bar for the Robo-Tank DIY Aquarium Controller..

$104.95 USD