If you’ve ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun bi-directional logic level converter is a small device that safely steps down 5V signals to 3.3V AND steps up 3.3V to 5V at the same time. This level converter also works with 2.8V and 1.8V devices. What really separates this Logic level converter from our previous versions is that you can successfully set your high and low voltages and step up and down between them safely on the same channel. Each level converter has the capability of converting 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side.

The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the "HV" pin, low voltage (3.3V for example) to "LV", and ground from the system to the "GND" pin.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Logic Level Converter Bi-Directional IIC 4 Way Level Conversion Module

  • Product Code: 5v-3.3v
  • Availability: In Stock
  • $2.89 USD


Related Products

Piezo Electronic Tone Buzzer Alarm 3-24v

Piezo Electronic Tone Buzzer Alarm 3-24v

This piezo buzzer measures just under 23mm not including the mounting holes. It operates on 3 - 24v ..

$1.89 USD

Universal AC Power Outlet Snap-In Receptacle

Universal AC Power Outlet Snap-In Receptacle

Connector Type: Receptacle, Female Sockets Current: 13A Voltage: 250V ..

$1.79 USD

EU AC Power Outlet Snap-In Receptacle Europe

EU AC Power Outlet Snap-In Receptacle Europe

Connector Type: Receptacle, Female Sockets Current: 10A Voltage: 250V ..

$1.79 USD

Arduino Compatible SD Card Module Slot Socket Reader

Arduino Compatible SD Card Module Slot Socket Reader

This is SD card module slot socket reader for Arduino ARM MCU etc microprocessors and it reads and w..

$2.69 USD