The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 15 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.

The Mega 2560 is an update to the Arduino Mega, which it replaces.

The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the ATmega16U2 (ATmega8U2 in the revision 1 and revision 2 boards) programmed as a USB-to-serial converter.

Revision 2 of the Mega2560 board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.

Revision 3 of the board has the following new features:

  • 1.0 pinout: added SDA and SCL pins that are near to the AREF pin and two other new pins placed near to the RESET pin, the IOREF that allow the shields to adapt to the voltage provided from the board. In future, shields will be compatible both with the board that use the AVR, which operate with 5V and with the Arduino Due that operate with 3.3V. The second one is a not connected pin, that is reserved for future purposes.
  • Stronger RESET circuit.
  • Atmega 16U2 replace the 8U2.

Arduino Specifications
Microcontroller ATmega2560
Operating Voltage 5V
Input Voltage (recommended) 7-12V
Input Voltage (limits) 6-20V
Digital I/O Pins 54 (of which 15 provide PWM output)
Analog Input Pins 16
Analog Outputs Pins
DC Current per I/O Pin 40 mA
DC Current for 3.3V Pin 50 mA
DC Current for 5V Pin 800 mA
Flash Memory 256 KB of which 8 KB used by bootloader
Eeprom 4 KB
Clock Speed 16 MHz
Length 101.52 mm
Width 53.3 mm
Weight 38

Write a review

Note: HTML is not translated!
    Bad           Good

Arduino Compatible Mega 2560 R3 ATmega2560-16AU Board With USB Cable

  • Product Code: Mega 2560
  • Availability: In Stock
  • $16.95 USD

Related Products

Ethernet Shield W5100 R3 For Arduino Mega 2560

Ethernet Shield W5100 R3 For Arduino Mega 2560

The Ethernet Shield for Arduino connects your Arduino to the internet in mere minutes. Just plug thi..

$15.95 USD

12V DC - 3.2A 36W Switching Power Supply

12V DC - 3.2A 36W Switching Power Supply

High efficiency, long life and high reliability; Low DC ripple, high efficiency; Low operation tempe..

$9.95 USD

Mountable RJ45 Panel Patch Cable

Mountable RJ45 Panel Patch Cable

Panel Mount RJ45 Female to MaleApproxiamately 12" in length..

$4.00 USD

Dual 4 Position 25A 600V Screw Terminal Strip Covered Barrier Block

Dual 4 Position 25A 600V Screw Terminal Strip Covered Barrier Block

TB series Barrier Terminal Block, 4 position, double row.The terminals are insulated from each other..

$2.99 USD